22 ответов в этой теме

[qqq]

Всем привет. Какой то конфликт иль еще что-то с железом. При графической нагрузке комп вылетает в синий экран... Хотелось бы посмотреть код, который он там пишет, но проблема в том, что я не успеваю это сделать, т.к. он всего пару секунд висит (пока скидывает (или что то там делает с) дамп памяти). Вопрос в следующем: Как убрать перезагрузку после синего экрана, или поставить на паузу, чтоб почитать то, что он там расписывает? ОС-Win 7. Заранее спс)

[Taciturn]

Так же как в Windows 2000/XP/2003/Vista.
Win+R => sysdm.cpl => Дополнительно => Загрузка и восстановление => Параметры => Отказ системы => Выполнить автоматическую перезагрузку

[qqq]

Спасибо, помогло... Тогда вопрос в следующем... О чем говорит ошибка

 IMG_0005.JPG   1.89 МБ   2 Скачано

Кто нить сталкивался? Находил ли решение?...

[Serge]

По крэш дампам которые записались на диск можно сказать больше чем по этой картинке.

[DEVILIK]

qqq, твой комп выключается/перезагружается, потому что обнаруживается проблема.

[qqq]

По крэш дампам которые записались на диск можно сказать больше чем по этой картинке.

А как посмотреть/где найти сие чудо?)

[Мяут]

/me саммонит GlebVt

[DEVILIK]

А как посмотреть/где найти сие чудо?)

обоснуй

[Serge]

А как посмотреть/где найти сие чудо?)

%SystemRoot%\Minidump

[qqq]

Не знаю, прально ли я сделал, но в итоге получил такие записи :

Loading Dump File [C:\Windows\Minidump72609-30669-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7100 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7100.0.x86fre.winmain_win7rc.090421-1700
Machine Name:
Kernel base = 0x82805000 PsLoadedModuleList = 0x8294d810
Debug session time: Sun Jul 26 18:14:30.229 2009 (GMT+4)
System Uptime: 0 days 7:04:05.023
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
..........

[DEVILIK]

ааа, так вот в чём дело

[Serge]

!analyze -v
в дебаггере набери

[D2T]

А то что после стоп, не загуглить?

[qqq]

Вот, что он пишет....

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: 86734024, Address of the WHEA_ERROR_RECORD structure.
Arg3: b66c2000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000135, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
Unable to load image \SystemRoot\system32\PSHED.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PSHED.dll
*** ERROR: Module load completed but symbols could not be loaded for PSHED.dll
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_SECTION_DESCRIPTOR ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************

ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.

FAULTING_MODULE: 82805000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 0

BUGCHECK_STR: 0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

CURRENT_IRQL: 0

STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
82928d2c 82c22f01 00000124 00000000 86734024 nt+0xdbf28
82928d68 828d3644 86733411 86734024 8285dc30 hal+0xef01
82928d98 82c231b3 86733268 82c30e38 00000000 nt+0xce644
82928eac 82c232a5 86733268 867332b8 00000000 hal+0xf1b3
82928ed0 82c23511 00000000 867332b8 82928ff0 hal+0xf2a5
82928ee0 82c195f5 00000000 00000000 00000000 hal+0xf511
82928ff0 82c16261 00000002 801db000 00000000 hal+0x55f5
00000000 00000000 00000000 00000000 00000000 hal+0x2261


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: hardware

IMAGE_NAME: hardware

BUCKET_ID: WRONG_SYMBOLS

Followup: MachineOwner
---------

Символы устанавливал...

[DEVILIK]

гугли

[Мяут]

ога, весь текст в гугль и вбивай

[muslimgauze]

A "0x00000124" Stop error message occurs when you use the "hot plugging" feature to add or to remove a PCI Express device on a Windows Server 2008-based computer or on a Windows Vista-based computer

[Телевизора Боялись]

да таже трабла постоянно с win 7 как решить кто подскажет?

[qqq]

Телевизора Боялись
Ошибка та же?

[DEVILIK]

да таже трабла постоянно с win 7 как решить кто подскажет?

у тебя проблема с видяхой, а не с ОС!